Hardwood Flooring Installation in Orem, Utah
What it costs, and what Orem's housing stock does to the job.
Hardwood flooring in a 1989-median city
The median Orem home was built in 1989 and 3.1% of the city’s housing predates 1940. For hardwood flooring specifically, that is not background color — it is the thing that decides the job.
This is the easiest housing in Utah to put a floor in, and it is worth saying so plainly. Plywood subfloors upstairs, a basement slab poured decades ago and long since dry, and almost nothing prewar to complicate it. The slab test that governs the newer half of the state is a formality here. The constraint is budget and taste rather than building.
Orem sits in the middle of the Utah range: a 1989 median, only 3.1% prewar, a bit over a quarter built this century. Old enough that the slabs are long dry, new enough that the subfloors are plywood rather than plank. Material choice is genuinely wide open here.
What it costs in Orem
Utah County labor runs below the Utah baseline, which is why the range below sits under the statewide $6–$22. Installed, materials and labor together:
| Work | Orem range | Utah range |
|---|---|---|
| Hardwood, installed | $6 – $21.5 a square foot | $6 – $22 a square foot |
An estimate, not a quote. These are planning ranges for Utah, not a quote. What you actually pay depends on your rooms, your subfloor and the material you choose.
Extras are where a Orem job most often moves away from the band: removing the old floor, prepping a plank subfloor, and stairs. The cost estimator prices those separately against your own room.
Questions worth asking before you book
- What is the subfloor, and what does it need? 3.1% of Orem homes predate 1940 and the median build year is 1989, so plywood or OSB is the likelier answer here and a plank subfloor is the exception worth ruling out. How to identify yours.
- Is the old floor coming out or being covered? Covering costs less and is sometimes the safer answer, but it costs you height at doors and at the bottom stair riser.
- What is the cut-and-waste allowance? Ten percent is normal; older or irregular rooms take more, and cuts are labor.
- What did the slab read, and what did the boards read? An installer who measured both has told you more than a classification code could. What S220 covers, and what is exempt.