Hardwood Floor Refinishing in Sandy, Utah
What it costs, and what Sandy's housing stock does to the job.
Floor refinishing in a 1985-median city
The median Sandy home was built in 1985 and 2.2% of the city’s housing predates 1940. For floor refinishing specifically, that is not background color — it is the thing that decides the job.
Unlikely to be relevant in most of this housing — under 3% of it predates 1940, so there is rarely an original floor hiding under anything. Where a 1980s house has had hardwood added since, a screen and recoat is usually all it needs, and it is one of the cheapest ways to make a whole floor look new again.
Sandy is eighties suburban Salt Lake County — 1985 median, 2.2% prewar. It sits hard against the Wasatch, so the practical question here is less about the slab and more about what arrives on boots at the front door for five months of the year.
What it costs in Sandy
Salt Lake / Wasatch Front is the Utah labor baseline, so the range below matches the statewide $3–$8. Installed, materials and labor together:
| Work | Sandy range | Utah range |
|---|---|---|
| Refinishing existing boards | $3 – $8 a square foot | $3 – $8 a square foot |
An estimate, not a quote. These are planning ranges for Utah, not a quote. What you actually pay depends on your rooms, your subfloor and the material you choose.
Extras are where a Sandy job most often moves away from the band: removing the old floor, prepping a plank subfloor, and stairs. The cost estimator prices those separately against your own room.
Questions worth asking before you book
- What is the subfloor, and what does it need? 2.2% of Sandy homes predate 1940 and the median build year is 1985, so plywood or OSB is the likelier answer here and a plank subfloor is the exception worth ruling out. How to identify yours.
- Is the old floor coming out or being covered? Covering costs less and is sometimes the safer answer, but it costs you height at doors and at the bottom stair riser.
- What is the cut-and-waste allowance? Ten percent is normal; older or irregular rooms take more, and cuts are labor.
- What did the slab read, and what did the boards read? An installer who measured both has told you more than a classification code could. What S220 covers, and what is exempt.