Hardwood Floor Refinishing in Layton, Utah
What it costs, and what Layton's housing stock does to the job.
Floor refinishing in a 1993-median city
The median Layton home was built in 1993 and 1.4% of the city’s housing predates 1940. For floor refinishing specifically, that is not background color — it is the thing that decides the job.
Effectively not a live option in most of this housing. With the great majority built since 2000 there is no original floor under the carpet — there is subfloor. Where a newer house already has hardwood that has dulled, a screen and recoat restores it for a fraction of replacing it, and removes no wood at all.
Layton is Davis County at its most typical — 1993 median, 36.7% built since 2000, almost nothing prewar. A large share of the housing turned over with Hill Air Force Base, and a lot of the basements down here were finished by owners later rather than by the builder at the start.
What it costs in Layton
Ogden / Davis County labor runs below the Utah baseline, which is why the range below sits under the statewide $3–$8. Installed, materials and labor together:
| Work | Layton range | Utah range |
|---|---|---|
| Refinishing existing boards | $3 – $7.5 a square foot | $3 – $8 a square foot |
An estimate, not a quote. These are planning ranges for Utah, not a quote. What you actually pay depends on your rooms, your subfloor and the material you choose.
Extras are where a Layton job most often moves away from the band: removing the old floor, prepping a plank subfloor, and stairs. The cost estimator prices those separately against your own room.
Questions worth asking before you book
- What is the subfloor, and what does it need? 1.4% of Layton homes predate 1940 and the median build year is 1993, so plywood or OSB is the likelier answer here and a plank subfloor is the exception worth ruling out. How to identify yours.
- Is the old floor coming out or being covered? Covering costs less and is sometimes the safer answer, but it costs you height at doors and at the bottom stair riser.
- What is the cut-and-waste allowance? Ten percent is normal; older or irregular rooms take more, and cuts are labor.
- What did the slab read, and what did the boards read? An installer who measured both has told you more than a classification code could. What S220 covers, and what is exempt.